What You Stand to Gain By Using Waterjet Cutting for Materials
One of the commonly used methods of cutting metal and other material in industrial plants is the waterjet machine. It makes use of an ultra-high pressure waterjet, which is sometimes used together with plasma cutting or an oxy-fuel flame to cut through matter. The waterjet machine cuts with a high degree of accuracy and this produces a very clean cut. This the reason why it is normally preferred for cutting of materials that require minimal damage to the cut parts, and also where wastage of material is undesirable especially if such material is expensive. Industries that need to cut through metals and other hard materials to manufacture and fashion products normally use waterjet cutting. Numerous benefits can be realized from the use of this method of cutting substances. The following are just a few of these advantages.
The heat aspect associated with many cutting methods is absent from waterjet cutting. These other ways of cutting are accompanied by the release of heat. The cutting is done at very high temperatures that are capable of melting even metal. Heat may destroy the material being worked on if the material cannot withstand high temperatures. When you expose such material like rubber and wood to heat, they will be damaged such that they will be unusable. But waterjet cutting can easily be used for such materials because it works with pressure rather than heat.
When cutting with a waterjet machine, little raw material is wasted because of the high accuracy involved. Waterjet cutting deals with a high degree of precision. The width of cut when using waterjet cutting could be as little as a millimeter thick. Thus, there is minimal wastage of the material being cut in comparison to the other cutting methods. And since it is carried out using computer software that are quite advanced, it is possible to get even higher degree precision cuts.
Waterjet cutting is applicable for cutting all kinds of material. Other cutting methods such as laser, plasma and use of oxy-fuel flame usually involves generation of heat, sometimes to the thousands of degrees hot. As such, they can only be applied for cutting of a limited numbered of materials such as metal and other hard minerals. Waterjet cutting, on the other hand, can be used for cutting all types of material, making it a truly versatile method of cutting substances.
Moreover, when you use a waterjet machine to cut through material, there’s very little debris left on the cut surface. It is usually necessary to carry out an extra cleaning process on the surface cut by other methods because such surfaces are usually deformed and bent sometimes. Conversely, surfaces cut with a waterjet machine hardly need any extra finishing due to the fact that they are normally as clean as they can get. This makes it easier to work with the material, which in turn translates to less labor required to carry out the tasks.